Beli kunci l elora di monotaro.id

- in plastic holder- nickel plated

- high cutting performance with minimal effort- maximum stability under load by additional inductive hardening- cutting edge hardness: 63-65 HRC- for hardened steel wire, piano wire (tensile strength 2300 N/mm²

T-shaped ball end hex key sets have one long arm with the drive tip at the end, and two short arms that form a handle that can provide more torque than an L-shaped key. They have a hex ball end at the tip of the long arm that can tighten and loosen hex head fasteners from multiple angles in hard-to-reach locations. Sets come with an assortment of hex keys for a range of fastener head sizes.

- box joint- self-locking due to gripping surfaces staggered in reverse order- teeth inductive hardened, trap protection- ELORA-No. 132-190 adjustable in 6

- 13 pcs.- in red plastic box with 2-colour-plastic inlay- 2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages- ELORA-Chrome-Vanadium 31CrV3 / 1.2208

- with precise and well readable preset-scale in mm graduation- right-handed roll- jaw set at 22,5°- head fine grounded, chrome plated- ELORA-Chrome-Vanadium 31CrV3 / 1.2208- according to ISO 6787- accordind to ASME B107.100

- with precise and well readable preset-scale in mm graduation- right-handed roll- jaw set at 22,5°- head fine grounded, chrome plated

ELORA "ELO-Drive"Combination and Ring Spanners are equipped with the "ELO-Drive" profile on the ring side: higher torque on the flanks of the screws/nuts without damage of the same dynamic and safe working

Set Contents:1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 19/32, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1.1/16, 1.1/4 Inch

- Tool Cabinet 7 laci- Pola lembaran logam padat dengan konstruksi sub padat, ELORA-yellow (RAL 1006)- Pelapis serbuk korosi dan anti gores- Ruang rak di bagian atas terbuat dari plastik ABS dengan 3 kompartemen penyimpanan untuk bagian kecil, lubang untuk 4 obeng dan 3 kaleng, pelek pada semua sisi- 200 kg kapasitas beban rak karena diperkuat penutup atas- Stang baja kokoh yang diperkuat ergonomis, dipasang di kedua sisinya- Sisi dan panel belakang tersembunyi dengan Euro-Perforasi 10 x 38 mm (lubang persegi 10 x 10 mm, pusat lubang tengah lubang 38 x38 mm) untuk memasang kait, baki, keranjang sampah, dudukan pemegang, pemegang gulungan kertas, kabel drum- Sistem penguncian sentral dengan kunci silinder dan sistem pengunci laci individu (jika ada satu laci yang terbuka, tidak mungkin membuka yang lain)- Kapasitas muat tiap laci 40 kg- Setiap laci memiliki sistem pengaman keamanan dan 100% dapat diekstrak- Laci dengan bantalan rel dengan bantalan bola- Laci pengukuran internal W 573 x D 410 mm- Laci ELORA-dilapisi bubuk hitam (RAL 9005)- Dapat dibagi secara terpisah dengan pemisah atau dilengkapi modul ELORA-OMS- Kapasitas pemuatan total 300 kg- Alat pengukur gauge yang luas dengan 4 Ø 125 mm karet penuh, kastor berjalan mulus,- 2 kastor putar dengan fungsi double break (tangensial dan aksial)- Dapat diupgrade dengan alat dada ELORA No. 1221-BANYAK, ELORA No. 1226-BANYAK dan panel belakang ELORA No. 1220-RW- Konfigurasi warna dan baki khusus sesuai permintaan- Pengiriman tanpa alat dan asesoris

- Blue lacquered, to be locked with padlock ELORA-No. 256- Heavy gauge sheet steel

- chrome-plated, polished- ELORA-Chrome-Vanadium 31CrV3 / 1.2208- square drive according to DIN 3120, ISO 1174, with ball retaining groove resp. with ball locking device- according to DIN 3123, ISO 3316

- Rugged ratchet with small, slim head- Forged gear wheel with male and female square- smallest possible swivel angle 11,25°- nonslip QUATROLIT®-2C-handle- with suspension hole- matt chrome-plated- ELORA-Chrome-Vanadium 31CrV3 / 1.2208- male square according to DIN 3120-A 12,5,- ISO 1174, with ball locking device- according to DIN 3122, ISO 3315

- quad measurement scale for Nm, kgm, in-lb and ft-lb- click type torque wrench with very noticeable and audible (‚‘click‘‘) signal- bi-directional fixing by turning the torque wrench